SpectraLight QC uses lighting technology that is superior to any light source box on the market. Since the instrument has a large number of light sources, including daylight, incandescent light, A”, horizontal daylight, three kinds of fluorescence (any combination between CWF, U30, U35, TL83 and TL84) and UVa, the number exceeds any other The product can therefore be applied to any specification. The integrated light sensor provides real-time digital output of fluorescent illumination and can be set by the operator to meet industry standards such as ASTM

And AATCC. The instrument's closed-loop fluorescent control allows the operator to move from one source to the next without waiting for the required warm-up time. The same sensors and electronics ensure that all fluorescent lights are controlled in real time, keeping accurate illumination throughout the life of the bulb. The SpectraLight QC also provides factory-calibrated UV light that allows the user to adjust the amount of UV light based on sample demand (based on the application).

Information

While lighting technology is the primary factor in visual assessment, achieving true supply chain consistency requires reliable information. To this end, SpectraLight QC generates and tracks data from all aspects of the visual assessment through its PC-based reporting capabilities. Data — includes company name, customer name, sample number, lamp used for evaluation, lamp status (lamp age, lamp remaining life, illuminance level, calibration information), operator name and certification (Farnsworth-Munsell 100 Hue Test Score Both — can be printed and sent with physical samples or transmitted electronically. Fundamentally, SpectraLight QC is its own auditing and tracing tool that makes it easy to analyze unqualified samples to identify the source of the problem. By troubleshooting faster and easier, SpectraLight QC not only reduces sample failure rates, but also allows parties to thoroughly investigate the supply chain and take corrective action to eliminate potential problems in the future. Continuous improvement creates perfection.

operator

The operator who operates the instrument is as important as the technical solution to visually assess the problem. SpectraLight QC's user-programmable features allow suppliers to create custom profiles based on the brand owner's source, illuminance levels and other parameters, ensuring that operators use the lights and accurate settings approved by each program. The system can also share this information generation report with the customer to determine any inconsistencies. You can also create individual operator profile files to record their Farnsworth-Munsell 100 Hue Test scores in these files. According to experts, as many as 2% of women and 7% of men have color vision defects. In the past, brand owners may have to send an operator twice a year to the world to “calibrate” their visual assessment tools throughout the supply chain. With SpectraLight QC, customers can share their preferences for instrument settings and operator vision requirements through a PC to improve accuracy and compliance.

Ceiling lighting equipment

Dimensions Height: 9.84 inches (250 mm) Height: 27.55 inches (700 mm)

Width: 37.00 inches (940 mm) Width: 37 inches (940 mm)

Depth: 25.98 in. (660 mm) Depth: 24.01 in. (610 mm)

Weight 89.3 lbs (40.5 kg) 22.0 lbs (10.0 kg)

Shipping weight 116.8 lbs (53.0 kg) 35.2 lbs (16.0 kg)

Chassis color Munsell symbol N5 or N7

Power requirement

power supply

L1NPE, 115V AC, 50/60Hz, 1150W

L1NPE, 230V AC, 50/60Hz, 1150W

L1NPE, 100V AC, 50/60Hz, 1150W

Main fuse

115V AC: F 10 A H 250 V (5x20 mm)

230V AC: F 6.3 A H 250 (5x20 mm)

100V AC: F 15 A H 250 V (5x20 mm)

power cable

Connector: specific country

Plug: IEC 60320 C13 type

Backup power 2W

Lamp option

Analog daylight* 5000k, CIE D50 midday sky daylight

6500k, CIE D65 average northern sky daylight

Fluorescence* Three options: cool white (4150k), U30 (3000k), U35 (3500k), TL84 (4000K)

Horizontal daylight simulation sunrise/sunset

Incandescent A 2856k, typical household incandescent light

UV filter filter close to UV

* Daylight and fluorescent light source selection. Specific daylight and fluorescent sources should be selected according to industry or application management standards.

The highest quality natural daylight

SpectraLight QC meets or exceeds all relevant international quality standards set for filtered tungsten daylight simulation.

Adjust the illuminance using the built-in illuminometer

The real-time digital illumination output can be adjusted to meet user requirements or ASTM and AATCC standards that match the sample type.

Closed loop automatic adjustment of illuminance

The built-in sensor automatically adjusts the voltage to maintain proper illumination and compensates for the wear and tear of the fluorescent lamp throughout its useful life.

Faster fluorescent lamp stabilization

After initial power-on, the lamp can be stabilized almost instantaneously when switching between settings. A useful indicator confirms the best stability. Factory calibrated UV

Each instrument has a rigorous initial UV calibration. Built-in sensor monitoring and correct UV output maintain the difference between the instruments. The UV output can also be adjusted manually.

Ability to create and store brand owner profiles

Users can create and store brand owner profiles to configure seven available preference lights for specific brand owners, reducing consistency issues.

Reporting and data tracking

Performance data for individual devices can be shared to ensure that all vendors meet the brand owner's specifications for root cause analysis of potential problems.

User software